LIVE WEBINARS



Directed Energy Deposition (DED) Solutions for Aviation, Energy & Defense.
Gas Turbine Components Additive Manufacturing & Repair.
Date and Time : Tuesday November 9 at 11 am & Wednesday November 10 at 2:30 pm (Malaysia & Singapore Time).

In this webinar, Optomec's Alex Hodik and Shan Hu will discuss common production applications, including the repair of turbine blade tips, seals and wear surfaces; compressor blades, (including titanium alloys), vanes, shrouds and other high value components. You'll learn how Optomec’s automated solution can replace manual operations, such as Tungsten Inert Gas (TIG) welding, and drastically reduces the cost of routine maintenance. The ROI of Optomec’s machinery has been recently calculated to be in excess of 180%. We will also discuss how Optomec’s laser-based processing provides superior mechanical performance due to its optimal metallurgy and minimal heat input, compared to manual operations.


Modern Separation Techniques for Polyolefin Microstructure Characterization
by MEng. Alejandro Fernández

DATE: 25th, November, 2021
TIME: 16:00h (Singapore and Malaysia Time)
DURATION: 1 hour

In this webinar you will learn about:
• Molar Mass Distribution by high-temperature gel permeation chromatography (HT-GPC) with infrared (IR) detection.
• Chemical Composition Distribution (CCD) techniques by CEF, CRYSTAF or TREF, especially important in polyolefin copolymers or blends.
• Bivariate Distribution techniques will also be reviewed because they provide a higher-level knowledge through 3d results that combine Molar Mass with Chemical Composition in a single experiment, such as CFC or SGIC 2D, delivering the full picture of the polyolefin microstructure.

About the Speaker
Alejandro Fernández has a Master’s Degree in Chemical Engineering from the Polytechnic University of Valencia, Spain. At university, he combined his studies with his passion for traveling, spending one year at the University of Bologna (Italy) and finishing his degree with a six-month stay at the University of Massachusetts Amherst (USA).
Having worked as an engineer in Polymer Char for the past 10 years, Alejandro has acquired vast experience in polyolefin characterization techniques and instrumentation. He is involved in important research projects in the analytical department and plays a principal role in the after-sale support to Polymer Char’s customers and official partners globally.

Registration is free but seats are limited.
Register Here >>>

Polyolefin Microstructure Characterization Tools for a QC Environment
by MEng. Alejandro Fernández

DATE: 17th February, 2022
TIME: 16:00h (Singapore and Malaysia Time)
DURATION: 1 hour

In this webinar you will learn:
• The most appropriate and beneficial techniques for quality control in the production of resins.
• How to optimize the performance of a resin.
• To use the most telling parameters for obtaining essential information about a resin’s microstructure
• Why Melt Index and Density, although common parameters, are not the best for defining a product’s performance.

About the Speaker
Alejandro Fernández has a Master’s Degree in Chemical Engineering from the Polytechnic University of Valencia, Spain. At university, he combined his studies with his passion for traveling, spending one year at the University of Bologna (Italy) and finishing his degree with a six-month stay at the University of Massachusetts Amherst (USA).
Having worked as an engineer in Polymer Char for the past 10 years, Alejandro has acquired vast experience in polyolefin characterization techniques and instrumentation. He is involved in important research projects in the analytical department and plays a principal role in the after-sale support to Polymer Char’s customers and official partners globally.

Registration is free but seats are limited.
Register Here >>>




Previous Webinars





TOP